Pair and connect the headset
Before using the headset, you must
pair and connect it with a compatible
If your mobile device supports the
A2DP Bluetooth profile and has a
music player feature, you can use the
device to also play music through the
If your mobile device does not support
the A2DP profile, you can separately
pair the headset with the mobile
device and a music player that
supports this profile. If you have
paired and connected the headset
with your mobile device, disconnect
the headset from it before pairing the
headset with the music player.
1. Ensure that your mobile device or
music player is switched on and
the headset is off.
2. Press and hold the power key (for
about 5 seconds) until the blue
indicator light starts to flash
3. Within about 3 minutes, activate
the Bluetooth feature on your
device, and set it to search for
4. Select the headset from the list of
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your device. If your
device does not have a keypad, it
may use this passcode by default.
In some devices, you may need to
make the connection separately
When the headset is connected to
your device and is ready for use, the
blue indicator light flashes slowly.
You can pair the headset with up to
eight devices but connect it to only
one device supporting the HFP profile
and another device supporting the
A2DP profile at a time.
To manually connect the headset to
the last used device that supports the
HFP profile (for example, after
connection loss), switch the headset
off and on, or press and hold the
answer/end key for about 2 seconds.
To manually connect the headset to a
device that supports the A2DP profile,
press the play/pause key.
You may be able to set your device so
that the headset connects to it
automatically. To activate this feature
in a Nokia device, change the paired
device settings in the Bluetooth menu.